Barb 1/2 Hose x 3/8 MPT Base UOM:EACH you can actually see it

you can actually see it working

HydraDri is a minimum residue cleaner

The angled male end lets a hose leave a fitting at 90 degrees instead of fighting a bend

Any change of section costs a little airflow

Operating at 3000 RPM

Barb 1/2 Hose x 3/8 MPT Base UOM:EACH you can actually see itProduct Overview Brass hose barb joining 1 2 inch hose to a 3 8 inch male NPTF thread. Midland part 32016. Important This Is a Low Pressure Fitting Hose barbs in this series are rated to 150 PSI and 71 degrees C. That is the manufacturer's published figure and it is the single most important thing on this page. A truckmount solution line runs at 500 to 1200 PSI and close to boiling. That is up to eight times this fitting's rated pressure. A barb is